CSCS Test Questions – Noise and Vibration – CSCS Mock Test | CSCS Mock Exam

The CSCS test questions below will cover everything you need to know for the core knowledge questions on Noise and Vibration.

These CSCS test questions will be added to our full CITB operatives mock test here. Please don’t forget to like, share, or comment if you found these CSCS test questions useful. The pass mark is 15 out of 20. Good luck!!!

1. You’re about to start working in a hearing protection zone and notice one of the ear pad from your ear defender is missing; what should you do?

Carry on working and get another one at your next break

Work quickly then leave the area

Carry on working without any hearing protection

Leave the noisy area and do not return until you have suitable hearing protection

Question 1 of 20

2. What does it mean if you hear a ringing sound in your ear after working with noisy equipment?

The noise level was acceptable

Your hearing is temporarily damaged

Your hearing protection did its job correctly while you worked

Your ears were exposed to vibrations while you worked

Question 2 of 20

3. What health risk do workers face if they have to use a vibrating tool on a regular basis?

Heart disease

Lung cancer

Dermatitis

Hand-arm vibration syndrome (HAVS)

Question 3 of 20

4. How can you reverse hearing damage that was caused by long-term noise exposure?

You must have an operation

You must change jobs immediately

You must take medication

The damage is permanent

Question 4 of 20

5. Wearing hearing protection is important because ___?

It completely eliminates all noise in your workplace

It improves your hearing

It reduces the amount of noise you’re exposed to

It helps to repair damage caused by loud noises

Question 5 of 20

6. Which of these are recommended ways for protecting your hearing at work? (Choose 2 answers)

Using rolled up tissue in your ears

Using ear defenders

Using soft cloth over your ears

Using earplugs

Using cotton wool pads

Question 6 of 20

7. Which of these is most likely to cause hand-arm vibration syndrome (HAVS)?

A hammer and chisel

A handsaw

A hammer drill

A battery-powered screwdriver

Question 7 of 20

8. What TWO health issues are most likely if someone uses a hammer drill for a long period of time? (Choose 2 answers)

Weil’s disease

Vibration white finger

Lung disease

Dermatitis

Carpal tunnel syndrome

Question 8 of 20

9. Which state of being will reduce the likelihood of you suffering from hand-arm vibration syndrome (HAVS)?

Cold and wet

Warm and dry

Warm and wet

Cold and dry

Question 9 of 20

10. What should you do if you are wearing no hearing protection and someone next to you starts using very noisy equipment?

Inform his/her supervisor and demand they stop using it

Carry on working, they will stop eventually

Speak to the worker and demand they stop using it

Leave the area and do not re-enter until you have the correct PPE

Question 10 of 20

11. What should you do if you think that loud noises at work has damaged your hearing?

Ask your employer to arrange a hearing test

Leave it, this will get better over time

Nothing, the damage has been done

Take some time off from work

Question 11 of 20

12. HAVS is a common workplace term, what do these initials stand for?

Hearing and vibration syndrome

Heart and vibration syndrome

Hand-arm vibration syndrome

Head-arm vibration syndrome

Question 12 of 20

13. What does this sign mean?

Do not touch

Safety glove must not be worn in this area

Safety gloves recommended but not compulsory

Safety gloves must be worn

Question 13 of 20

14. You need to wear disposable foam ear plugs; how should you insert them?

Fold it in half, insert it halfway into your ear

Soak it in water and insert it while pulling the top of your ear to open your ear canal

Soak it in water, squeeze it dry, insert it into your ears

Roll it up and insert it while pulling the top of your ear to open your ear canal

Question 14 of 20

15. Which of these could help to reduce the risk of hand-arm vibration if you have to use a vibrating tool?

Grip the tool as tight as possible

Use one hand whenever possible

Apply more force when using the tool

Ensure you’re not gripping the tool too tightly

Question 15 of 20

16. Which TWO health issues are likely if someone is exposed to excessive noise levels? (Choose 2 answers)

Their hearing could improve

They can get ear infections

They can suffer from temporary hearing loss

They could suffer from permanent hearing loss

Question 16 of 20

17. What are THREE early signs of hand-arm vibration syndrome (HAVS)? (Choose 3 answers)

Temporary loss of feelings in your fingers

A pins-and-needles sensation in your fingers

Blisters on your fingers

Your fingertips will turn white

Finger rashes

Question 17 of 20

18. What should you do if you doctor says you have work-related hand-arm vibration syndrome (HAVS)?

This is not contagious so you do not have to inform anyone

Tell your work colleagues only

Join a support group online

Inform your manager or supervisor

Question 18 of 20

19. Noise levels might be a problem if you must raise your voice to be heard by someone who is standing ____ away.

Question 19 of 20

20. What health problem is associated with using hand-held vibrating tools?

Skin cancer on the areas of your body that come into contact with tools

Itchy skin

Damaged blood vessels on the hands and fingers

Hand blisters

Question 20 of 20

CSCS Test Questions – Noise and Vibration

One Response

Leave a Reply to richard williams Cancel reply