CSCS Mock Test 2024 – (100 multiple choice questions)

The CSCS mock test 2024 below features 100 multiple-choice questions and answers to help you practice and prepare for your Health, Safety and Environment Test in 2024. These 100 questions will cover all 16 sections of the core knowledge questions you’re likely to face.

There will be no time limit, so take your time and go through each question carefully. Also, let us know in the comments section how you got on. Was it easy? Was it difficult? Share your thoughts on this CSCS mock test 2024 below. Good luck!!!

1. All of the following are true about ladders EXCEPT: (choose 2 answers)

Question 1 of 100

2. What would you do if you notice a live electrical wire fall into a puddle of water?

Question 2 of 100

3. What is considered a safe voltage when using electrical equipment on a construction site?

Question 3 of 100

4. Which of the following could help you to protect the environment while you are working?

Question 4 of 100

5. When using a ladder you should always enure that you have at least ____ points of contact.

Question 5 of 100

6. What should you do before adjusting an electric hand tool?

Question 6 of 100

7. Which voltage can cause sever injury or death?

Question 7 of 100

8. What does this sign mean?

Question 8 of 100

9. Which of these items would NOT need to undergo a PAT test in the workplace?

Question 9 of 100

10. If a site vehicle is driving well above the speed limit on site, you should ___.

Question 10 of 100

11. What is the first thing you should do if you discover a fire on-site?

Question 11 of 100

12. A near miss can be described as:

Question 12 of 100

13. What should you do if you doctor says you have work-related hand-arm vibration syndrome (HAVS)?

Question 13 of 100

14. Which of the following should risk assessments identify?

Question 14 of 100

15. If someone is using a mobile crane and you need to get pass, you should___.

Question 15 of 100

16. Serious accidents should be reported to:

Question 16 of 100

17. What purpose does a steel toe serve in a work boot?

Question 17 of 100

18. What does it mean if you hear a ringing sound in your ear after working with noisy equipment?

Question 18 of 100

19. What does this sign mean?

Question 19 of 100

20. What type of fire extinguisher should be used on cooking oil fires?

Question 20 of 100

21. When are the rules regarding health and safety normally discussed?

Question 21 of 100

22. What should you do if your supervisor asks you to operate a dump truck but you’ve never actually driven one before?

Question 22 of 100

23. What should you do if you are witness to an accident on site?

Question 23 of 100

24. If you have to use a power tool with a rotating blade you should ___.

Question 24 of 100

25. When should you report a health and safety concern to your supervisor?

Question 25 of 100

26. What does this sign mean?

Question 26 of 100

27. What should you do if a vehicle is lifting materials and you need to walk under the load to get to your place of work?

Question 27 of 100

28. Which of these are common fire risks on a constructions site? (Choose 2 answers)

Question 28 of 100

29. What should you do if you need to lift a load which blocks your front view?

Question 29 of 100

30. What are three early signs of hand-arm vibration syndrome (HAVS)? (Choose 3 answers)

Question 30 of 100

31. Pedestrians are most likely to get injured by a vehicle on site when the vehicle is ___.

Question 31 of 100

32. What should you do if you notice a mobile crane about to hit something while lifting a load?

Question 32 of 100

33. What do fire extinguishers with a Cream colour band contain?

Question 33 of 100

34. What should you do if there’s a fire on-site and the designated fire warden has given instructions?

Question 34 of 100

35. What does this sign mean?

Question 35 of 100

36. The nozzle of a CO2 fire extinguisher is well known for becoming ___ after use.

Question 36 of 100

37. What should you do if you realize you cannot carry out a job as described in the method statement?

Question 37 of 100

38. What does this sign mean?

Question 38 of 100

39. Who should a signaller be in contact with at all times while giving signals?

Question 39 of 100

40. RIDDOR is a health and safety term related to:

Question 40 of 100

41. What’s the main purpose of a risk assessment?

Question 41 of 100

42. What should you do to protect yourself from electric shock if you have to use a 230-volt tool?

Question 42 of 100

43. Which of these is NOT normally included in the general site rules?

Question 43 of 100

44. Which two fire extinguishers should you avoid using in confined spaces? (Choose 2 answers)

Question 44 of 100

45. Which of these is most likely if you can see frost around the valve of an LPG cylinder?

Question 45 of 100

46. You have to carry out a job that requires flammable liquid, how much flammable liquid should you take from the stores?

Question 46 of 100

47. How can you check if a residual current device (RCD) connected to a power tool is working correctly?

Question 47 of 100

48. What is the most common way of keeping traffic routes free from pedestrians?

Question 48 of 100

49. What should you do if you need to use a power tool and the guard is missing?

Question 49 of 100

50. What does this sign mean?

Question 50 of 100

51. Who is responsible for reporting unsafe working conditions on a building site?

Question 51 of 100

52. What is the main advantage of using battery-powered tools instead of electrical ones?

Question 52 of 100

53. What does this sign mean?

Question 53 of 100

54. For safety purposes, what is the optimal ladder angle when placed against the wall from the ground?

Question 54 of 100

55. What should you do if you’re attending a site induction and the presenter says something you don’t understand?

Question 55 of 100

56. What should you do if a load is too heavy for you to move on your own, there are no colleagues around to help you, and the load cannot be divided into smaller parts?

Question 56 of 100

57. What is the main purpose of a fire extinguisher?

Question 57 of 100

58. What should you do if you discover a quicker, but different way of working as described in the method statement?

Question 58 of 100

59. Battery-powered tools are usually preferred in a construction environment over their electrical counterparts because ___.

Question 59 of 100

60. Why does a work environment need to be kept clean?

Question 60 of 100

61. Why must workers sign in when entering a site?

Question 61 of 100

62. Which of these could be used to verify that a signaller is trained and competent?

Question 62 of 100

63. A co-worker is dizzy and complains of feeling faint, what should you do?

Question 63 of 100

64. What should you do if you have to work near an electric cable which has exposed wires?

Question 64 of 100

65. What is the best way to avoid an accident with site traffic if you need to walk across the site?

Question 65 of 100

66. Maintaining a clean working environment helps to: (choose 3 answers)

Question 66 of 100

67. What is the first thing you as a worker should do when you first arrive on site?

Question 67 of 100

68. What should you do if a previous back injury is affecting the job you’re currently doing?

Question 68 of 100

69. Information regarding site traffic rules are usually ___.

Question 69 of 100

70. The responsibility of managing health and safety on a construction site belongs to:

Question 70 of 100

71. What should you do if another contractor is carrying out work which affects your safety?

Question 71 of 100

72. What is the best method for minimizing dust at a work site?

Question 72 of 100

73. All of the following statements about manual handling are true EXCEPT:  (Choose 2 answers)

Question 73 of 100

74. Which of these best describes a “tool box talk”?

Question 74 of 100

75. What should you do if you think that loud noises at work has damaged your hearing?

Question 75 of 100

76. The Main reason for carrying out an accident investigation is to:

Question 76 of 100

77. Which of these should NOT be used on electrical fires? (Choose 2 answers)

Question 77 of 100

78. Which of these emergency procedures should be explained at your site induction? (Choose 3 answers)

Question 78 of 100

79. Before using a power tool, you should carry out a visual inspection, what are the 2 main things you should look for? (Choose 2 answers)

Question 79 of 100

80. How can you reverse hearing damage that was caused by long-term noise exposure?

Question 80 of 100

81. What does the term PAT mean?

Question 81 of 100

82. What does it mean if your entire work-site has been given a prohibition notice?

Question 82 of 100

83. Besides a CO2 fire extinguisher, which of these should you use to tackle electrical fires?

Question 83 of 100

84. How would you know if you need a permit to work before starting a job?

Question 84 of 100

85. What should you do if there is a large fire on-site and you have not been trained to use a fire extinguisher?

Question 85 of 100

86. What does this sign mean?

Question 86 of 100

87. What should you do if you discover a better way of lifting a load than the method currently in place?

Question 87 of 100

88. Which condition is most likely if someone's body comes into contact with wet cement?

Question 88 of 100

89. What should you do if you need to carry a load down a steep slope?

Question 89 of 100

90. Why is a site induction important?

Question 90 of 100

91. Which of these could be used as a safety precaution if a vehicle has to tip materials into an excavation?

Question 91 of 100

92. What type of fire extinguisher should be used on a fuel-based fire?

Question 92 of 100

93. What does this sign mean?

Question 93 of 100

94. What should you do if you are working and your helmet gets damaged?

Question 94 of 100

95. What procedure should you follow if you’re refuelling a dumper and accidentally spill a large amount of petrol?

Question 95 of 100

96. When referring to ladders, which out of these four statements is NOT true?

Question 96 of 100

97. What should you do if you’re using an electric hand tool and it suddenly cuts out?

Question 97 of 100

98. What health problem is associated with using hand-held vibrating tools?

Question 98 of 100

99. What type of pollution do hand-held power tools contribute to?

Question 99 of 100

100. In accordance with the guidance on underground service pipes, yellow service pipes carry ___.

Question 100 of 100


 

FAQ

1. What’s the pass mark for this CSCS practice test?

The pass mark for this CSCS practice test is 90 out of 100. The real test has 50 questions and requires you to score 45 out of 50 to pass, we’ve doubled the number of questions and the number of answers needed to pass.

2. How much time do I have?

No time limit has been set. This was done to encourage you to read each question carefully, you can also use this opportunity to go back and double-check your answers before submitting.

3. Are these the real CSCS test questions?

Not word for word, but these CSCS test questions and answers are very similar to the real ones.

4. What if I fail?

This CSCS practice test is not easy and straightforward. If you fail, just keep practicing and revising, trust in yourself, and put in the effort, and you will pass.

33 Comments

  1. James October 1, 2023
    • timmy March 15, 2024
  2. Paul February 22, 2023
  3. Paul February 21, 2023
  4. CHRISTINE January 16, 2023
  5. charlotte jones May 13, 2021
  6. charlotte jones May 12, 2021
  7. Odugbenga Odubela March 12, 2021
  8. Brad March 10, 2021
  9. peter paul February 26, 2021
  10. Dee February 11, 2021
  11. Derek January 26, 2021
  12. Shar December 11, 2020
  13. vicky November 5, 2020
    • vicky November 5, 2020
  14. Russell November 3, 2020
  15. Steve rice September 3, 2020
  16. David August 23, 2020
  17. David August 23, 2020
  18. gary July 15, 2020
  19. Miss Avier March 15, 2020
  20. Damian March 1, 2020
  21. Dave February 24, 2020
  22. Mr. Fixit January 31, 2020
  23. Patryk January 21, 2020
  24. Craig January 15, 2020
    • admin January 16, 2020
  25. Mukesh Kumar January 15, 2020
  26. George October 25, 2019
    • admin October 25, 2019
  27. daryl K October 3, 2019
  28. Carl Edwards September 28, 2019
    • Michael November 3, 2019

Leave a Reply to Dave Cancel reply