CSCS Mock Test 2024 – (100 multiple choice questions)

The CSCS mock test 2024 below features 100 multiple-choice questions and answers to help you practice and prepare for your Health, Safety and Environment Test in 2024. These 100 questions will cover all 16 sections of the core knowledge questions you’re likely to face.

There will be no time limit, so take your time and go through each question carefully. Also, let us know in the comments section how you got on. Was it easy? Was it difficult? Share your thoughts on this CSCS mock test 2024 below. Good luck!!!

1. What should you do if you see a mobile plant using a route designated for pedestrians?

Question 1 of 100

2. What does this sign mean?

Question 2 of 100

3. What is the best way to avoid an accident with site traffic if you need to walk across the site?

Question 3 of 100

4. Which of these is most likely if you can see frost around the valve of an LPG cylinder?

Question 4 of 100

5. What should you do if you discover a better way of lifting a load than the method currently in place?

Question 5 of 100

6. What purpose does a steel toe serve in a work boot?

Question 6 of 100

7. Why must workers sign in when entering a site?

Question 7 of 100

8. What should you do if a load is too heavy for you to move on your own, there are no colleagues around to help you, and the load cannot be divided into smaller parts?

Question 8 of 100

9. What type of fire extinguisher should be used on a fuel-based fire?

Question 9 of 100

10. Which state of being will reduce the likelihood of you suffering from hand-arm vibration syndrome (HAVS)?

Question 10 of 100

11. What does this sign mean?

Question 11 of 100

12. What’s the main purpose of a risk assessment?

Question 12 of 100

13. You’re about to carry out a job which requires a hot-work permit, you must ensure____. (Choose 2 answers)

Question 13 of 100

14. Which of these could be used as a safety precaution if a vehicle has to tip materials into an excavation?

Question 14 of 100

15. Who should a signaller be in contact with at all times while giving signals?

Question 15 of 100

16. Two of the main topics covered in a site induction are: (Choose 2 answers)

Question 16 of 100

17. What do fire extinguishers with a Red colour band contain?

Question 17 of 100

18. Which of these emergency procedures should be explained at your site induction? (Choose 3 answers)

Question 18 of 100

19. When are the rules regarding health and safety normally discussed?

Question 19 of 100

20. Why is a site induction important?

Question 20 of 100

21. What should you do if the trolley you’re using gets damaged and one of its wheels fall off?

Question 21 of 100

22. A residual current device (RCD) should be used with 230v tools because ___.

Question 22 of 100

23. Which voltage can cause sever injury or death?

Question 23 of 100

24. When using a ladder you should always enure that you have at least ____ points of contact.

Question 24 of 100

25. Before you can operate a plant on site you must be ___ and ___. (Choose 2 answers)

Question 25 of 100

26. What is considered a safe voltage when using electrical equipment on a construction site?

Question 26 of 100

27. What should you do if there is a large fire on-site and you have not been trained to use a fire extinguisher?

Question 27 of 100

28. What does the term PAT mean?

Question 28 of 100

29. What does this sign mean?

Question 29 of 100

30. What is the first thing you as a worker should do when you first arrive on site?

Question 30 of 100

31. The responsibility of managing health and safety on a construction site belongs to:

Question 31 of 100

32. Who is responsible for reporting unsafe working conditions on a building site?

Question 32 of 100

33. If someone is using a mobile crane and you need to get pass, you should___.

Question 33 of 100

34. What should you do if you’re attending a site induction and the presenter says something you don’t understand?

Question 34 of 100

35. What is the primary reason that employees must report any and all accidents that occur on the job site?

Question 35 of 100

36. What should you do if you have to work near an electric cable which has exposed wires?

Question 36 of 100

37. What is the main purpose of a fire extinguisher?

Question 37 of 100

38. Which of these is most likely to cause hand-arm vibration syndrome (HAVS)?

Question 38 of 100

39. How can you check if a residual current device (RCD) connected to a power tool is working correctly?

Question 39 of 100

40. What is the MAIN danger when walking next to a 360° crane that’s working near a wall?

Question 40 of 100

41. What does this sign mean?

Question 41 of 100

42. What does this sign mean?

Question 42 of 100

43. You have to work in a corridor which happens to be a fire escape route, you must ensure that_________.

Question 43 of 100

44. What is the main advantage of using battery-powered tools instead of electrical ones?

Question 44 of 100

45. Which of the following could help you to protect the environment while you are working?

Question 45 of 100

46. RIDDOR is a health and safety term related to:

Question 46 of 100

47. What should you do if you notice a mobile crane about to hit something while lifting a load?

Question 47 of 100

48. Building sites usually use a 110-volt electricity supply instead of a 230-volt supply because ___.

Question 48 of 100

49. In accordance with the guidance on underground service pipes, yellow service pipes carry ___.

Question 49 of 100

50. You should not walk behind a lorry while it is reversing because_____.

Question 50 of 100

51. What is the first thing you should do if you notice diesel spilling onto the ground while a colleague is refuelling an excavator?

Question 51 of 100

52. What should you do if you’re unclear about a particular topic discussed during your site induction?

Question 52 of 100

53. Which of these should NOT be used on electrical fires? (Choose 2 answers)

Question 53 of 100

54. What should you do if you think that loud noises at work has damaged your hearing?

Question 54 of 100

55. What does the signal below mean?

Question 55 of 100

56. What does it mean if your entire work-site has been given a prohibition notice?

Question 56 of 100

57. What should you do if your supervisor asks you to operate a dump truck but you’ve never actually driven one before?

Question 57 of 100

58. Why does a work environment need to be kept clean?

Question 58 of 100

59. What does this sign mean?

Question 59 of 100

60. What do fire extinguishers with a Cream colour band contain?

Question 60 of 100

61. What would you do if you notice a live electrical wire fall into a puddle of water?

Question 61 of 100

62. How would you know if you need a permit to work before starting a job?

Question 62 of 100

63. Before using a power tool, you should carry out a visual inspection, what are the 2 main things you should look for? (Choose 2 answers)

Question 63 of 100

64. What should you do if there’s a fire on-site and the designated fire warden has given instructions?

Question 64 of 100

65. What does this sign mean?

Question 65 of 100

66. What type of pollution do hand-held power tools contribute to?

Question 66 of 100

67. Blue and white health and safety signs mean:

Question 67 of 100

68. What are Class Three ladders designed for?

Question 68 of 100

69. What should you do before adjusting an electric hand tool?

Question 69 of 100

70. What should you do if you’re using an electric hand tool and it suddenly cuts out?

Question 70 of 100

71. What is the best method for minimizing dust at a work site?

Question 71 of 100

72. Battery-powered tools are usually preferred in a construction environment over their electrical counterparts because ___.

Question 72 of 100

73. What procedure should you follow if you’re refuelling a dumper and accidentally spill a large amount of petrol?

Question 73 of 100

74. What do fire extinguishers with a Blue colour band contain?

Question 74 of 100

75. Serious accidents should be reported to:

Question 75 of 100

76. What should you do if you need to use a power tool and the guard is missing?

Question 76 of 100

77. What does this sign mean?

Question 77 of 100

78. What type of fire extinguisher should be used on cooking oil fires?

Question 78 of 100

79. What does it mean if you hear a ringing sound in your ear after working with noisy equipment?

Question 79 of 100

80. What type of health and safety signs are triangular?

Question 80 of 100

81. Green safety signs signify:

Question 81 of 100

82. What should you do if you doctor says you have work-related hand-arm vibration syndrome (HAVS)?

Question 82 of 100

83. Which of these is NOT normally included in the general site rules?

Question 83 of 100

84. Information regarding site traffic rules are usually ___.

Question 84 of 100

85. You see a lorry parking and notice it has a flat tyre; you should tell the driver because ____.

Question 85 of 100

86. For safety purposes, what is the optimal ladder angle when placed against the wall from the ground?

Question 86 of 100

87. As work progresses, you realize that the safety rules given at your site induction are clearly out-of-date, you should_______.

Question 87 of 100

88. A co-worker is dizzy and complains of feeling faint, what should you do?

Question 88 of 100

89. What should you do if you’re refuelling a piece of equipment and accidentally spill a large amount of fuel on your clothes?

Question 89 of 100

90. What should you do if you discover a quicker, but different way of working as described in the method statement?

Question 90 of 100

91. All of the following statements about manual handling are true EXCEPT:  (Choose 2 answers)

Question 91 of 100

92. Site inductions should be attended by:

Question 92 of 100

93. Which of the following should risk assessments identify?

Question 93 of 100

94. Besides a CO2 fire extinguisher, which of these should you use to tackle electrical fires?

Question 94 of 100

95. What should you do if another contractor is carrying out work which affects your safety?

Question 95 of 100

96. What should you do if you are witness to an accident on site?

Question 96 of 100

97. What is the most common way of keeping traffic routes free from pedestrians?

Question 97 of 100

98. Which of these could help a signaller stay safe while carrying out their job?

Question 98 of 100

99. According to the fire triangle, what 3 factors must be present for a fire to start? (Choose 3 answers)

Question 99 of 100

100. What equipment should be used when digging close to underground electrical services?

Question 100 of 100


 

FAQ

1. What’s the pass mark for this CSCS practice test?

The pass mark for this CSCS practice test is 90 out of 100. The real test has 50 questions and requires you to score 45 out of 50 to pass, we’ve doubled the number of questions and the number of answers needed to pass.

2. How much time do I have?

No time limit has been set. This was done to encourage you to read each question carefully, you can also use this opportunity to go back and double-check your answers before submitting.

3. Are these the real CSCS test questions?

Not word for word, but these CSCS test questions and answers are very similar to the real ones.

4. What if I fail?

This CSCS practice test is not easy and straightforward. If you fail, just keep practicing and revising, trust in yourself, and put in the effort, and you will pass.

33 Comments

  1. James October 1, 2023
    • timmy March 15, 2024
  2. Paul February 22, 2023
  3. Paul February 21, 2023
  4. CHRISTINE January 16, 2023
  5. charlotte jones May 13, 2021
  6. charlotte jones May 12, 2021
  7. Odugbenga Odubela March 12, 2021
  8. Brad March 10, 2021
  9. peter paul February 26, 2021
  10. Dee February 11, 2021
  11. Derek January 26, 2021
  12. Shar December 11, 2020
  13. vicky November 5, 2020
    • vicky November 5, 2020
  14. Russell November 3, 2020
  15. Steve rice September 3, 2020
  16. David August 23, 2020
  17. David August 23, 2020
  18. gary July 15, 2020
  19. Miss Avier March 15, 2020
  20. Damian March 1, 2020
  21. Dave February 24, 2020
  22. Mr. Fixit January 31, 2020
  23. Patryk January 21, 2020
  24. Craig January 15, 2020
    • admin January 16, 2020
  25. Mukesh Kumar January 15, 2020
  26. George October 25, 2019
    • admin October 25, 2019
  27. daryl K October 3, 2019
  28. Carl Edwards September 28, 2019
    • Michael November 3, 2019

Leave a Reply to Russell Cancel reply