Home
>
>
CSCS Mock Test 2024 – (100 multiple choice questions)

CSCS Mock Test 2024 – (100 multiple choice questions)

Updated on: March 13, 2024 CSCS Mock Test 33 Comments

The CSCS mock test 2024 below features 100 multiple-choice questions and answers to help you practice and prepare for your Health, Safety and Environment Test in 2024. These 100 questions will cover all 16 sections of the core knowledge questions you’re likely to face.

There will be no time limit, so take your time and go through each question carefully. Also, let us know in the comments section how you got on. Was it easy? Was it difficult? Share your thoughts on this CSCS mock test 2024 below. Good luck!!!

1. What should you do if you need to carry a load down a steep slope?

Question 1 of 100

2. What does this sign mean?

Question 2 of 100

3. When are the rules regarding health and safety normally discussed?

Question 3 of 100

4. What does this sign mean?

Question 4 of 100

5. Two of the main topics covered in a site induction are: (Choose 2 answers)

Question 5 of 100

6. What should you do if you are witness to an accident on site?

Question 6 of 100

7. A co-worker is dizzy and complains of feeling faint, what should you do?

Question 7 of 100

8. Which of these is most likely to cause hand-arm vibration syndrome (HAVS)?

Question 8 of 100

9. If a work tool has been given a prohibition notice this means the tool ___.

Question 9 of 100

10. Before you can operate a plant on site you must be ___ and ___. (Choose 2 answers)

Question 10 of 100

11. What should you do if you think a load is going to fall from a moving vehicle?

Question 11 of 100

12. Which of these could be used to verify that a signaller is trained and competent?

Question 12 of 100

13. What is considered a safe voltage when using electrical equipment on a construction site?

Question 13 of 100

14. When using a ladder you should always enure that you have at least ____ points of contact.

Question 14 of 100

15. Which two fire extinguishers should you avoid using in confined spaces? (Choose 2 answers)

Question 15 of 100

16. Battery-powered tools are usually preferred in a construction environment over their electrical counterparts because ___.

Question 16 of 100

17. Which of these is most likely if you can see frost around the valve of an LPG cylinder?

Question 17 of 100

18. What does this sign mean?

Question 18 of 100

19. What should you do before adjusting an electric hand tool?

Question 19 of 100

20. Which of these best describes a “tool box talk”?

Question 20 of 100

21. Which of these is NOT normally included in the general site rules?

Question 21 of 100

22. What does the signal below mean?

Question 22 of 100

23. When referring to ladders, which out of these four statements is NOT true?

Question 23 of 100

24. What must do when working in a hearing protection zone?

Question 24 of 100

25. Which of these are common fire risks on a constructions site? (Choose 2 answers)

Question 25 of 100

26. What should you do if you discover a quicker, but different way of working as described in the method statement?

Question 26 of 100

27. How can you reverse hearing damage that was caused by long-term noise exposure?

Question 27 of 100

28. How can you check if a residual current device (RCD) connected to a power tool is working correctly?

Question 28 of 100

29. What type of fire extinguisher should be used on a fuel-based fire?

Question 29 of 100

30. All of the following statements about manual handling are true EXCEPT:  (Choose 2 answers)

Question 30 of 100

31. As work progresses, you realize that the safety rules given at your site induction are clearly out-of-date, you should_______.

Question 31 of 100

32. What procedure should you follow if you’re refuelling a dumper and accidentally spill a large amount of petrol?

Question 32 of 100

33. Which of these should NOT be used on electrical fires? (Choose 2 answers)

Question 33 of 100

34. What should you do if you realize you cannot carry out a job as described in the method statement?

Question 34 of 100

35. What does this sign mean?

Question 35 of 100

36. Which of these items would NOT need to undergo a PAT test in the workplace?

Question 36 of 100

37. What does it mean if you hear a ringing sound in your ear after working with noisy equipment?

Question 37 of 100

38. You should not walk behind a lorry while it is reversing because_____.

Question 38 of 100

39. What are Class Three ladders designed for?

Question 39 of 100

40. What type of fire extinguisher should be used on cooking oil fires?

Question 40 of 100

41. What should you do if you think that loud noises at work has damaged your hearing?

Question 41 of 100

42. If you have to use a power tool with a rotating blade you should ___.

Question 42 of 100

43. If a worker is uncomfortable climbing to a certain height on a specific type of ladder, he or she should:

Question 43 of 100

44. What should you do if there’s a fire on-site and the designated fire warden has given instructions?

Question 44 of 100

45. Disposable ear plugs are essential when working in loud environments. How many times should you wear disposable ear plugs?

Question 45 of 100

46. What do fire extinguishers with a Blue colour band contain?

Question 46 of 100

47. What do fire extinguishers with a Cream colour band contain?

Question 47 of 100

48. What are three early signs of hand-arm vibration syndrome (HAVS)? (Choose 3 answers)

Question 48 of 100

49. Information regarding site traffic rules are usually ___.

Question 49 of 100

50. Which of these should you consider before carrying a load?

Question 50 of 100

51. What should you do if your supervisor asks you to operate a dump truck but you’ve never actually driven one before?

Question 51 of 100

52. Why must workers sign in when entering a site?

Question 52 of 100

53. What does this sign mean?

Question 53 of 100

54. What does this sign mean?

Question 54 of 100

55. Blue and white health and safety signs mean:

Question 55 of 100

56. Green safety signs signify:

Question 56 of 100

57. Which voltage can cause sever injury or death?

Question 57 of 100

58. What is the first thing you should do if you discover a fire on-site?

Question 58 of 100

59. Who should a signaller be in contact with at all times while giving signals?

Question 59 of 100

60. What equipment should be used when digging close to underground electrical services?

Question 60 of 100

61. What should you do if there is a large fire on-site and you have not been trained to use a fire extinguisher?

Question 61 of 100

62. What does this sign mean?

Question 62 of 100

63. What does this sign mean?

Question 63 of 100

64. Which of these emergency procedures should be explained at your site induction? (Choose 3 answers)

Question 64 of 100

65. When should you report a health and safety concern to your supervisor?

Question 65 of 100

66. What do fire extinguishers with a Red colour band contain?

Question 66 of 100

67. What is the first thing you should do if you notice diesel spilling onto the ground while a colleague is refuelling an excavator?

Question 67 of 100

68. Why is a site induction important?

Question 68 of 100

69. What health problem is associated with using hand-held vibrating tools?

Question 69 of 100

70. What should you do if you discover a better way of lifting a load than the method currently in place?

Question 70 of 100

71. What does this sign mean?

Question 71 of 100

72. What should you do if you have to work near an electric cable which has exposed wires?

Question 72 of 100

73. What is the best method for minimizing dust at a work site?

Question 73 of 100

74. Which state of being will reduce the likelihood of you suffering from hand-arm vibration syndrome (HAVS)?

Question 74 of 100

75. What purpose does a steel toe serve in a work boot?

Question 75 of 100

76. You have to carry out a job that requires flammable liquid, how much flammable liquid should you take from the stores?

Question 76 of 100

77. Pedestrians are most likely to get injured by a vehicle on site when the vehicle is ___.

Question 77 of 100

78. What do fire extinguishers with a Black colour band contain?

Question 78 of 100

79. What does this sign mean?

Question 79 of 100

80. A residual current device (RCD) should be used with 230v tools because ___.

Question 80 of 100

81. Maintaining a clean working environment helps to: (choose 3 answers)

Question 81 of 100

82. If someone is using a mobile crane and you need to get pass, you should___.

Question 82 of 100

83. What should you do if you see a mobile plant using a route designated for pedestrians?

Question 83 of 100

84. RIDDOR is a health and safety term related to:

Question 84 of 100

85. What should you do if you notice a mobile crane about to hit something while lifting a load?

Question 85 of 100

86. Who is responsible for reporting unsafe working conditions on a building site?

Question 86 of 100

87. What is the MAIN danger when walking next to a 360° crane that’s working near a wall?

Question 87 of 100

88. What should you do if you’re attending a site induction and the presenter says something you don’t understand?

Question 88 of 100

89. Which of these could be used as a safety precaution if a vehicle has to tip materials into an excavation?

Question 89 of 100

90. What is the main purpose of a fire extinguisher?

Question 90 of 100

91. What should you do if the trolley you’re using gets damaged and one of its wheels fall off?

Question 91 of 100

92. How would you know if you need a permit to work before starting a job?

Question 92 of 100

93. Serious accidents should be reported to:

Question 93 of 100

94. If a site vehicle is driving well above the speed limit on site, you should ___.

Question 94 of 100

95. Why does a work environment need to be kept clean?

Question 95 of 100

96. What would you do if you notice a live electrical wire fall into a puddle of water?

Question 96 of 100

97. What should you do if you doctor says you have work-related hand-arm vibration syndrome (HAVS)?

Question 97 of 100

98. Before using a power tool, you should carry out a visual inspection, what are the 2 main things you should look for? (Choose 2 answers)

Question 98 of 100

99. You’re about to carry out a job which requires a hot-work permit, you must ensure____. (Choose 2 answers)

Question 99 of 100

100. What is the most common way of keeping traffic routes free from pedestrians?

Question 100 of 100


 

FAQ

1. What’s the pass mark for this CSCS practice test?

The pass mark for this CSCS practice test is 90 out of 100. The real test has 50 questions and requires you to score 45 out of 50 to pass, we’ve doubled the number of questions and the number of answers needed to pass.

2. How much time do I have?

No time limit has been set. This was done to encourage you to read each question carefully, you can also use this opportunity to go back and double-check your answers before submitting.

3. Are these the real CSCS test questions?

Not word for word, but these CSCS test questions and answers are very similar to the real ones.

4. What if I fail?

This CSCS practice test is not easy and straightforward. If you fail, just keep practicing and revising, trust in yourself, and put in the effort, and you will pass.

33 Comments

  1. James October 1, 2023

    99 out of 100 questions correctly answered finding this site very useful indeed just got to keep focused now

    Reply
    • timmy March 15, 2024

      well done sir you have really done so well so so happy for you

  2. Paul February 22, 2023

    100/100.

    Reply
  3. Paul February 21, 2023

    99/100

    Reply
  4. CHRISTINE January 16, 2023

    I have passed my test my test 100 out of 100 correct questions in 30 minute. my advice is to carry on practice and practice and more practice.

    Reply
  5. charlotte jones May 13, 2021

    99/100 Looks like practising on here and reading the citb book is paying off….test saturday

    Reply
  6. charlotte jones May 12, 2021

    99/100 …..revision is paying off ,

    Reply
  7. Odugbenga Odubela March 12, 2021

    Thanks for this mock test l got 97/100.it really help me in preparing for my test.

    Reply
  8. Brad March 10, 2021

    97 I’m ready lol

    Reply
  9. peter paul February 26, 2021

    just got 100/100 and about to do my test in a couple hours

    Reply
  10. Dee February 11, 2021

    94 out of 100
    and I am making the 100 for first time
    It is a great training for the test
    Thanks for it!

    Reply
  11. Derek January 26, 2021

    100/100 easy for an old sweat like me. Good to practice, and yes I did learn a couple of things id forgotten.

    Reply
  12. Shar December 11, 2020

    I passed my test with 49/50 , practiced on here and it was so helpful highly recommended

    Reply
  13. vicky November 5, 2020

    91/100 not too bad but could be better.

    Reply
    • vicky November 5, 2020

      96. getting better.

  14. Russell November 3, 2020

    Practice makes perfect

    Reply
  15. Steve rice September 3, 2020

    Very pleased with first mock test score but not quite there yet ……great test tho
    77/100….

    Reply
  16. David August 23, 2020

    97/100 keep on doing mock test to make sure I get it right practice practice practice and you will get it spot on

    Reply
  17. David August 23, 2020

    Good site. Just keep on practicing and I am sure you will get a pass doing my test next week

    Reply
  18. gary July 15, 2020

    91 out of 100 still ok

    Reply
  19. Miss Avier March 15, 2020

    93/100, confident
    I could get 100 looking to become a brick mason about to do some training and get a CSCS card

    Reply
  20. Damian March 1, 2020

    87 out of a 100, best keep practicing,

    Reply
  21. Dave February 24, 2020

    99 this time .

    Great site

    Reply
  22. Mr. Fixit January 31, 2020

    98!/100 should be a pass!lol
    CITB test pass in 03′ & never studied for cscs since! Updating mine as more employers asking for it!!!
    new cards 2020 last 5 years instead of 3!

    Reply
  23. Patryk January 21, 2020

    Failed my test twice hopefully this helps me to succeed

    Reply
  24. Craig January 15, 2020

    Just had my test and passed thanks to these mock tests

    Reply
    • admin January 16, 2020

      Well done Craig.

  25. Mukesh Kumar January 15, 2020

    Obtained 94 out of 100.

    Reply
  26. George October 25, 2019

    88 out of 100,is that a pass?

    Reply
    • admin October 25, 2019

      The pass mark for the real test is 45 out of 50, so for 100 questions it would be 90.

  27. daryl K October 3, 2019

    got my test on tuesday hopefully enough times doing this test will prove helpful

    Reply
  28. Carl Edwards September 28, 2019

    Passed my test today my advice is to practice practice practice. All the questions are right here just read the question carefully.

    Reply
    • Michael November 3, 2019

      Are these question similar to the actually test ??

Leave a Reply to vicky Cancel reply