CSCS Mock Test 2024 – (100 multiple choice questions)

The CSCS mock test 2024 below features 100 multiple-choice questions and answers to help you practice and prepare for your Health, Safety and Environment Test in 2024. These 100 questions will cover all 16 sections of the core knowledge questions you’re likely to face.

There will be no time limit, so take your time and go through each question carefully. Also, let us know in the comments section how you got on. Was it easy? Was it difficult? Share your thoughts on this CSCS mock test 2024 below. Good luck!!!

1. The responsibility of managing health and safety on a construction site belongs to:

Question 1 of 100

2. If you have to use a power tool with a rotating blade you should ___.

Question 2 of 100

3. Pedestrians are most likely to get injured by a vehicle on site when the vehicle is ___.

Question 3 of 100

4. What should you do if there is a large fire on-site and you have not been trained to use a fire extinguisher?

Question 4 of 100

5. What should you do if you are witness to an accident on site?

Question 5 of 100

6. What should you do if the trolley you’re using gets damaged and one of its wheels fall off?

Question 6 of 100

7. What does this sign mean?

Question 7 of 100

8. What should you do if you have to work near an electric cable which has exposed wires?

Question 8 of 100

9. Which state of being will reduce the likelihood of you suffering from hand-arm vibration syndrome (HAVS)?

Question 9 of 100

10. What is the best way to avoid an accident with site traffic if you need to walk across the site?

Question 10 of 100

11. What does the term PAT mean?

Question 11 of 100

12. Disposable ear plugs are essential when working in loud environments. How many times should you wear disposable ear plugs?

Question 12 of 100

13. Before using a power tool, you should carry out a visual inspection, what are the 2 main things you should look for? (Choose 2 answers)

Question 13 of 100

14. What should you do if you’re refuelling a piece of equipment and accidentally spill a large amount of fuel on your clothes?

Question 14 of 100

15. The nozzle of a CO2 fire extinguisher is well known for becoming ___ after use.

Question 15 of 100

16. Blue and white health and safety signs mean:

Question 16 of 100

17. What is the main advantage of using battery-powered tools instead of electrical ones?

Question 17 of 100

18. What should you do if you need to lift a load which blocks your front view?

Question 18 of 100

19. Which of these is most likely if you can see frost around the valve of an LPG cylinder?

Question 19 of 100

20. Which of these is NOT normally included in the general site rules?

Question 20 of 100

21. What should you do before adjusting an electric hand tool?

Question 21 of 100

22. Who should a signaller be in contact with at all times while giving signals?

Question 22 of 100

23. What does this sign mean?

Question 23 of 100

24. Which of the following could help you to protect the environment while you are working?

Question 24 of 100

25. When are the rules regarding health and safety normally discussed?

Question 25 of 100

26. Maintaining a clean working environment helps to: (choose 3 answers)

Question 26 of 100

27. Two of the main topics covered in a site induction are: (Choose 2 answers)

Question 27 of 100

28. What is the primary reason that employees must report any and all accidents that occur on the job site?

Question 28 of 100

29. What should you do if you are working and your helmet gets damaged?

Question 29 of 100

30. What should you do if your supervisor asks you to operate a dump truck but you’ve never actually driven one before?

Question 30 of 100

31. What does it mean if your entire work-site has been given a prohibition notice?

Question 31 of 100

32. Which condition is most likely if someone's body comes into contact with wet cement?

Question 32 of 100

33. What should you do if another contractor is carrying out work which affects your safety?

Question 33 of 100

34. Which of these could help a signaller stay safe while carrying out their job?

Question 34 of 100

35. The Main reason for carrying out an accident investigation is to:

Question 35 of 100

36. What do fire extinguishers with a Black colour band contain?

Question 36 of 100

37. Which of these could be used to verify that a signaller is trained and competent?

Question 37 of 100

38. What should you do if you think that loud noises at work has damaged your hearing?

Question 38 of 100

39. What type of pollution do hand-held power tools contribute to?

Question 39 of 100

40. In accordance with the guidance on underground service pipes, yellow service pipes carry ___.

Question 40 of 100

41. Which of these are common fire risks on a constructions site? (Choose 2 answers)

Question 41 of 100

42. What should you do if you need to use a power tool and the guard is missing?

Question 42 of 100

43. What should you do if you’re working in a deep trench and you start to feel dizzy?

Question 43 of 100

44. What type of fire extinguisher should be used on cooking oil fires?

Question 44 of 100

45. If you have to work alone you might be asked to ______.

Question 45 of 100

46. How can you reverse hearing damage that was caused by long-term noise exposure?

Question 46 of 100

47. Why is a site induction important?

Question 47 of 100

48. What does this sign mean?

Question 48 of 100

49. You have to carry out a job that requires flammable liquid, how much flammable liquid should you take from the stores?

Question 49 of 100

50. What does this sign mean?

Question 50 of 100

51. All of the following are true about ladders EXCEPT: (choose 2 answers)

Question 51 of 100

52. What does the signal below mean?

Question 52 of 100

53. What should you do if you doctor says you have work-related hand-arm vibration syndrome (HAVS)?

Question 53 of 100

54. If a worker is uncomfortable climbing to a certain height on a specific type of ladder, he or she should:

Question 54 of 100

55. Site inductions should be attended by:

Question 55 of 100

56. You should not walk behind a lorry while it is reversing because_____.

Question 56 of 100

57. Which of these should you consider before carrying a load?

Question 57 of 100

58. What equipment should be used when digging close to underground electrical services?

Question 58 of 100

59. What type of fire extinguisher should be used on a fuel-based fire?

Question 59 of 100

60. Green safety signs signify:

Question 60 of 100

61. What should you do if a vehicle is lifting materials and you need to walk under the load to get to your place of work?

Question 61 of 100

62. What does this sign mean?

Question 62 of 100

63. Which of these is most likely to cause hand-arm vibration syndrome (HAVS)?

Question 63 of 100

64. How can you check if a residual current device (RCD) connected to a power tool is working correctly?

Question 64 of 100

65. All of the following statements about manual handling are true EXCEPT:  (Choose 2 answers)

Question 65 of 100

66. What does this sign mean?

Question 66 of 100

67. What do fire extinguishers with a Red colour band contain?

Question 67 of 100

68. What should you do if you see a mobile plant using a route designated for pedestrians?

Question 68 of 100

69. You have to work in a corridor which happens to be a fire escape route, you must ensure that_________.

Question 69 of 100

70. What is the MAIN danger when walking next to a 360° crane that’s working near a wall?

Question 70 of 100

71. What does it mean if you hear a ringing sound in your ear after working with noisy equipment?

Question 71 of 100

72. What should you do if you notice a mobile crane about to hit something while lifting a load?

Question 72 of 100

73. What is the first thing you should do if you notice diesel spilling onto the ground while a colleague is refuelling an excavator?

Question 73 of 100

74. What should you do if you realize you cannot carry out a job as described in the method statement?

Question 74 of 100

75. How would you know if you need a permit to work before starting a job?

Question 75 of 100

76. Why must workers sign in when entering a site?

Question 76 of 100

77. What procedure should you follow if you’re refuelling a dumper and accidentally spill a large amount of petrol?

Question 77 of 100

78. What should you do if you discover a better way of lifting a load than the method currently in place?

Question 78 of 100

79. Which of these could be used as a safety precaution if a vehicle has to tip materials into an excavation?

Question 79 of 100

80. What should you do if you discover a quicker, but different way of working as described in the method statement?

Question 80 of 100

81. What is the most common way of keeping traffic routes free from pedestrians?

Question 81 of 100

82. You see a lorry parking and notice it has a flat tyre; you should tell the driver because ____.

Question 82 of 100

83. Before you can operate a plant on site you must be ___ and ___. (Choose 2 answers)

Question 83 of 100

84. What should you do if you think a load is going to fall from a moving vehicle?

Question 84 of 100

85. What type of health and safety signs are triangular?

Question 85 of 100

86. Information regarding site traffic rules are usually ___.

Question 86 of 100

87. Which of these emergency procedures should be explained at your site induction? (Choose 3 answers)

Question 87 of 100

88. What is considered a safe voltage when using electrical equipment on a construction site?

Question 88 of 100

89. What should you do if a load is too heavy for you to move on your own, there are no colleagues around to help you, and the load cannot be divided into smaller parts?

Question 89 of 100

90. Which voltage can cause sever injury or death?

Question 90 of 100

91. What does this sign mean?

Question 91 of 100

92. What should you do if there’s a fire on-site and the designated fire warden has given instructions?

Question 92 of 100

93. What purpose does a steel toe serve in a work boot?

Question 93 of 100

94. What should you do if you’re using an electric hand tool and it suddenly cuts out?

Question 94 of 100

95. What should you do if you’re attending a site induction and the presenter says something you don’t understand?

Question 95 of 100

96. What is the first thing you as a worker should do when you first arrive on site?

Question 96 of 100

97. Besides a CO2 fire extinguisher, which of these should you use to tackle electrical fires?

Question 97 of 100

98. For safety purposes, what is the optimal ladder angle when placed against the wall from the ground?

Question 98 of 100

99. What does this sign mean?

Question 99 of 100

100. Which of the following should risk assessments identify?

Question 100 of 100


 

FAQ

1. What’s the pass mark for this CSCS practice test?

The pass mark for this CSCS practice test is 90 out of 100. The real test has 50 questions and requires you to score 45 out of 50 to pass, we’ve doubled the number of questions and the number of answers needed to pass.

2. How much time do I have?

No time limit has been set. This was done to encourage you to read each question carefully, you can also use this opportunity to go back and double-check your answers before submitting.

3. Are these the real CSCS test questions?

Not word for word, but these CSCS test questions and answers are very similar to the real ones.

4. What if I fail?

This CSCS practice test is not easy and straightforward. If you fail, just keep practicing and revising, trust in yourself, and put in the effort, and you will pass.

33 Comments

  1. James October 1, 2023
    • timmy March 15, 2024
  2. Paul February 22, 2023
  3. Paul February 21, 2023
  4. CHRISTINE January 16, 2023
  5. charlotte jones May 13, 2021
  6. charlotte jones May 12, 2021
  7. Odugbenga Odubela March 12, 2021
  8. Brad March 10, 2021
  9. peter paul February 26, 2021
  10. Dee February 11, 2021
  11. Derek January 26, 2021
  12. Shar December 11, 2020
  13. vicky November 5, 2020
    • vicky November 5, 2020
  14. Russell November 3, 2020
  15. Steve rice September 3, 2020
  16. David August 23, 2020
  17. David August 23, 2020
  18. gary July 15, 2020
  19. Miss Avier March 15, 2020
  20. Damian March 1, 2020
  21. Dave February 24, 2020
  22. Mr. Fixit January 31, 2020
  23. Patryk January 21, 2020
  24. Craig January 15, 2020
    • admin January 16, 2020
  25. Mukesh Kumar January 15, 2020
  26. George October 25, 2019
    • admin October 25, 2019
  27. daryl K October 3, 2019
  28. Carl Edwards September 28, 2019
    • Michael November 3, 2019

Leave a Reply to Dee Cancel reply